Stainless steel mixing tank is a mixing equipment for mixing, mixing and deploying the required materials.In the production, in order to avoid the safety hidden danger of the mixing tank, it is necessary to carry out regular maintenance of the mixing tank, which can improve the production efficiency of the mixing tank, but also improve the service life of the mixing tank.The following is a stainless steel mixing tank manufacturer to teach you to understand the maintenance tips of the stainless steel mixing tank.

1. Before using the stainless steel mixing tank, the tank must be scalded with light hot water, and then washed and disinfected with steam.All kinds of materials into the tank, need to be fixed on the tank cover of the material pipe, or open the lid into the tank, the input material should not be too full, so as to avoid the material is stirred outside the splash, resulting in unhealthy environment or loss.

2, according to the proportion into the tank, to be filled, and then start the motor, generally 3-5 minutes later, stir evenly, open the plug valve discharge, until the next feed.

3. After stirring, put all the remaining materials in the tank. Rinse with warm water in a short time to remove the materials attached to the tank wall, and then carefully clean the tank with 40℃-50℃ alkaline water and rinse it with clean water for the next use.

4, often pay attention to check the stainless steel mixing tank equipment and its reducer, there is insufficient lubricating oil, to supplement in time, every six months to replace.

5. When the equipment does not need to be used, it is necessary to clean the inside and outside with warm water. After cleaning, it is necessary to remember to clean the water clearly so as not to corrode the tank.Clean the tank regularly to keep the surface clean and the inner liner bright for durability.