The electric heating sandwich pot is mainly used for dissolving, sterilizing, heating and preparing, boiling and steaming materials, with high temperature resistance, corrosion resistance, strong productivity and fast heating. The operation is simple and convenient, etc. Electrically heated sandwich pot is increasingly used in modern industrial production, so let's explain the installation and commissioning of the electrically heated sandwich pot.
The installation and commissioning of the electrically heated sandwich pan:
.1. After receiving the goods, you should check whether the products and parts are damaged, if there is loss and damage, please contact our company in time to solve.
2. The electric heating sandwich pot has been tested before leaving the factory, and the relative positions of all the components have been installed and adjusted, so that the user can only check and not disassemble the product at will, in order to avoid improper re-installation and adjustment, which will affect the performance of the product.
3. Electric heating sandwich pot does not need to be fixed, as long as it can be placed on a flat concrete floor.
4. The power supply should be in accordance with the requirements of this equipment in the form of stirring structure, and the shell of the electrically heated sandwich pot must have good grounding to avoid accidents from leakage.
5. When installing, attention should be paid to ensure the smooth flow of the oil inlet pipeline, without blockage.
6. Tighten the two fastening screws on the support frame, and do not allow the oil inlet and outlet pipes at both ends to rotate with the pot when shaking and turning the pot.
7. After the installation is completed, the electric heating sandwich pot should be tested and checked for empty operation, and only put into operation after the normal operation of the transmission parts.
8. After feeding, if there is leakage at the joint, tighten the nut until there is no leakage, and the overflow port is not allowed to be fitted with a valve.
9. When releasing material, open the lid first, then turn the handwheel to tilt the pot so that the material is released from the outlet.
10. For electrically heated laminated pans, the material is discharged from the bottom outlet of the pan.