The mixing process of the stainless steel mixing tank is not only different in the mixing paddle, but also in the mixing point, such as center mixing, side mixing, top mixing, bottom mixing, etc. The mixing process of the stainless steel mixing tank is very complicated. Each mixing process has different mixing effects. The mixing process selected when mixing different materials is different. Only for a certain specified material to determine which type of mixing is suitable

The mixing position of the stainless steel mixing tank can be divided into: top center, top eccentric, top eccentric oblique, side wall oblique push, bottom center and so on. The difference between the center stirring and the side stirring of the tank is: the mixing and shaking effect of the side stirring is better than the center stirring, the top center is easy to form a concentric laminar flow, and the top center stirring is poor in the mixing effect. However, side mixing requires high dynamic balance in the design and manufacture of the tank, and cannot be used in a mixing method where the stirring blade is directly close to the inner diameter of the tank. Therefore, side mixing is only suitable for production occasions with medium-speed mixing and low-speed mixing. It is more complicated when the tank is made, and the balance will be worse. It is recommended to use the center mixing process when high-speed mixing equipment is required.

The design and manufacture of stainless steel mixing tank is not as easy as imagined. It requires a combination of experience and practice. There is no mixing process suitable for all materials. Each mixing form has its own unique advantages. It is necessary to find the most suitable mixing process and The mixing equipment also needs to undergo continuous testing.