Electric heating pot and steam pot, cooking pot, has been widely used in candy, pharmacy, dairy, alcohol, cakes, candied fruit, beverage, canned, sauced meat and other food processing, can also be used in large restaurant or dining room to boil soup, cook, stew, boil congee, etc., is a food processing and improve quality, shorten time, improve the working conditions good equipment. In production, heat conduction oil needs to be added in the use of electric heating sandwich pot, but customers who buy the sandwich pot for the first time do not know how to add heat conduction oil in the sandwich pot. So, xiaobian here to explain to you how to correctly add heat conduction oil to the electric heating sandwich pot.

(1) One r3/4 "×90 external screw head and 3/4 screw ball valve at 45° right rear of the external bile arc for exhaust. The exhaust device is at the top of the jacket, which is conducive to the discharge of the gas in the heating process of the thermal oil, so as to avoid the splashing out of the thermal oil in the heating process.

(2) the electric heating pot sandwich filling inside of L - QC320 type heat conduction oil 38 kg (quantity are for reference only, the pan flat first, with a locking device fixed pot body, then the exhaust valve connected to the oil oil pot equipment use, opened the oil hole is used for measuring the exhaust, attention should be paid to observe the metering jet, the pot flat heat conduction oil spill stopped in the hole, This hole is also a common observation hole for heat conduction oil. If the heat conduction oil is less than this limit, fill it.

(3) When the heat conduction oil begins to heat, the inlet oil can be removed, and the exhaust ball valve is opened. After heating, the exhaust ball valve is closed, and the pot can be turned over by swinging the handle. The inlet oil can equipment is used as an accessory. When refueling, the refueling equipment is connected with the exhaust ball valve, and it is removed at the end of refueling.

(4) PT100 at the back of the pot is used to measure the temperature of the heat conduction oil. When the set temperature is detected by the electric control box, the heating will not continue when the set temperature is exceeded; otherwise, the heating will continue when the set temperature is lower than the set temperature.

(5) At the bottom of the interlayer pot oil discharging device, install 3/4 ball valve (300℃ high temperature resistance), when the need to discharge oil can be opened, so as to facilitate the discharge of oil.